Camfil CC400 Panduan Teknis - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Teknis untuk Pembersih Udara Camfil CC400. Camfil CC400 18 halaman. Air cleaners concealed

TECHNICAL MANUAL

Air Cleaner CC400 Concealed

12. Taking into operation

First, read the entire user manual.

Connect the plug into the power supply or connect to installed safety switch.

Only appropriately qualified electricians may carry out work on or in this.

As standard the system has 6 step controller card.

You must be able to turn of the power supply without touching the unit.

The Air Cleaner Concealed must always be positioned and used indoors only.

Air outlets and intakes must not be obstructed during use. Before it is taken into operation, ensure that there is sufficient

space (50 cm) around outlet and inlet.

When connecting ventilation ducts to the Air Cleaner Concealed, these items must be secured to support their own weight.

There is not recommended to connect more than 8 meters of 250mm circular ventilation ducts on outlet and inlet of the unit.

12.3. Electrical connection

Electrical connection must be carried out by an appropriately qualified electrician. All routing of cables, etc. must be carried

out in accordance with the relevant regulations. The Air Cleaner Concealed is factory supplied ready for plugging in. Any

intervention in the machine's internal electrical systems must only be carried out by appropriately qualified persons using

Camfil AB supplied equipment.

The Air Cleaner Concealed must only be connected to the network voltage that is stated on the machine plate (identification

plate).

Air Cleaner Consealed CC400 manual,

Ver. 001

Oct 2018