Camfil CITY S Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembersih Udara Camfil CITY S. Camfil CITY S 9 halaman.

19 PRODUCT AND THE ENVIRONMENT

The air purifier is made from lead-free components. It can be recycled. Used models must always

be sent to a recycling station for correct recycling and/or disposal of parts and components.

20 FILTERS AND THE ENVIRONMENT

Note that filters must not be disposed of along with ordinary household waste. Scrapped filters

must always be correctly taken care of and handled safely. Recycling or disposal must always be

carried out at an approved waste facility. If you have any questions about this, please contact your

local authority or distributor for advice on correct care.

21 MAINTENANCE

If necessary, the unit can be cleaned using a mild cleaning agent.

Before cleaning, always switch off the machine and pull out the electrical connector!

22 INSTRUCTIONS FOR REPLACING FILTERS

WARNING! When handling used filters, personal protective equipment such as protective gloves

and masks must be used. To choose the correct type of respiratory protection, consult either the

safety representative / officer at your workplace or the manufacturer of the respiratory protection.

Used filters may contain harmful substances and particles. With incorrect handling, these can

escape to the environment and present risks of sickness and ill health.

Filters should be replaced on a continuous basis. See Camfil AB's recommendations concerning

the frequency of filter replacements.

Camfil – Clean Air Solutions

23 FILTER REPLACEMENT

Always use protective gloves and respiratory protection when handling used filters!

Risk of ill health and sickness.

1. Switch off the unit by turning the safety

switch or remove the electrical connec

tor. Make sure that the blue operating

LED's is off.

2. Lift of the top cover of the unit

3. Push the two buttons and lift up the hatch.

4. Take a firm grip on the pull the hatch

upwards.

5. Grip the handle on top of the filter and

pull it towards you. Put the filter in a

plastic bag. Do the same procedure on

the other filter and put it in a plastic bag.

6. Take a new HEPA filter out of its box.

NB! Do not touch the filter's surface.

Hold the handle only!

Put the filter in its positioning press it

down and against the pattern of holes.

The black gasket must be towards the

hole pattern of the unit.

Do steps 1- 6 in reverse order.

Camfil – Clean Air Solutions