DIVIMATH HDZero Panduan Memulai Cepat - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Pemanjang DIVIMATH HDZero. DIVIMATH HDZero 8 halaman.
Juga untuk DIVIMATH HDZero: Panduan Pengguna (17 halaman)

Halaman Cetak

(1) Format SD card (Choose FAT32 and Allocation Unit size to 4096 bytes);

(2) Power off VRX if it is on;

(3) Unzip content of corresponding VTX zip file onto SD-card, and insert SD to the VRX module;

(4) Connect cable with module and VTX as shown right;

(5) Power on VRX module

(6) If "Wait to Connect VTX..." or "Check cable ...", make sure (4) is secured;

(7) If "Firmware update failed", Repeat steps from (1);

(8) If "Firmware update successful", VTX is updated.

(9) HDZERO_TX.bin is removed from SD card automatically.

Note: Putting an empty file named as "DONOTREMOVE.txt" file on SD card root directory will prevent

HDZERO_TX.bin from being removed. It is useful when updating multiple VTXes.

VRX update Guide

Steps to update VRX:

(1) Disconnect the cable connecting VRX and VTX, if it is connected;

(2) Unzip content of HDZeroVRX_4SMA_Revddmmyyyy.zip onto SD-card, insert SD to the module

(3) Power on VRX, and waiting for "Success".

The firmware will be automatically deleted from SD card after updating.

Note: Do not power off VRX while updating firmware until "Update Completed". Otherwise VRX will not

be able to boot up next time.

Steps to flush VRX in case of not booting up:

(1) Power off VRX;

(2) Unzip content of HDZeroVRX_4SMA.Revddmmyyyy.zip onto SD-card, insert SD to the module;

(3) Move the switch to Bottom position with tweezers (not included);

(4) Power on goggle module, the red LED will be lit;

(5) Wait for red LED to turn off, on, and then off again (it may take over 10 min to complete);

(6) Power off, and move the switch to TOP position with tweezers;

(7) Repower goggle module, it should now boot up normally.