CamFive FM30 Panduan Memulai Cepat - Halaman 18

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Peralatan Industri CamFive FM30. CamFive FM30 19 halaman. Fiber laser marking machine
Juga untuk CamFive FM30: Panduan Pengguna (19 halaman)

Halaman Cetak

4. Laser beam path should be closed as far as possible in case the laser is leaked.

5. The fan must be checked if it is working correctly after being started up.

6. Use professional paper to wipe the lens clean. After wiping the lens, please wait for the alcohol

7. It is strictly prohibited to place any irrelevant items with reflection or diffuse objects around the

equipment in case of laser reflection to the human body or flammable items.

8. During the working process, there must be a person waiting on duty, especially during the pro-

cess of high power cutting or carving organic ingredients higher material, in order to avoid unexpec-

ted danger or fire. Do not operate without training or violates operation. In this case, we will not

9. As this kind of laser is invisible, pay attention to safety when working. Equipment is strictly prohi-

bited to be placed near inflammable or explosive items in case of laser deviation of fires.

10. When the machine is working or debugging the light path, please be sure to pay attention not to

have any body part in the transfer area of the light path to avoid damage. Wear protective glasses

when adjusting the light path and adjust to the smaller current in order to avoid laser deviation of

11. The power supply voltage: Voltage fluctuations will lead to unstable equipment. High voltage

power supply can cause permanent damage to the device. To avoid the damage of equipment and

electric circuit caused by voltage fluctuation and ensure the stability of the machine, we suggest

users install a voltage stabilizer that is at least 5000 W. For users whose voltage is quite unstable,

12. Please cut off the power supply immediately if the machine malfunctions or is on fire.

13. When the relative humidity of the environment is more than 80%, do not work with the machine.

Otherwise, it will affect the lifetime of the machinery or damage electronic circuits.

14. When there is thunder and/or lightning, do not operate the machine.

The user must strictly abide by the above rules. Otherwise, the manufacturer shall not be responsi-

to be completely volatilized before installation.

take responsibility for any done damage.

be sure to install a regulator.

ble for any injury or damage.

fires.