3DTV DLP2 Petunjuk

Jelajahi secara online atau unduh pdf Petunjuk untuk Kacamata 3D 3DTV DLP2. 3DTV DLP2 2 halaman.

Overview

Model DLP2 glasses work with all 3D Ready DLP projectors and with all Mitsubishi and Samsung

DLP TV's. In all 3D Ready Projectors and some recent Mitsubishi TV's the DLP Link Mode must

be turned on with the remote. In the other TV's it is always on. Although it is often feasible to

use our IR Shutter glasses and Gen2 Emitter together with DLP Link glasses, there may be mutual

interference and so if either type does not operate properly turn off the DLP Link function or

unplug the Emitter to test for proper operation of the remaining type. All DLP Link glasses are

activated by pressing the button on the left temple and will shut off automatically and all models

can be used together.

if you turn them on before the 3D program starts. If this happens turn them off

and then on again.

Changing Battery

Turn the glasses upside down, depress the tab 1 and while depressed slide out the battery container

as shown. Replace the battery and slide back in. The battery should last several months in normal

use and there are longer life CR2032 batteries available on the net.

WHEN NOT IN USE OR PUT GLASSES IN A BOX OR THEY WILL CONTINUE TO OPERATE!!

Changing Right/Left Eye Polarity

or the white polarity reversal button on the 3DTV Corp Gen2 Emitter or the invert glasses button on

your TV or projector remote.

Nose/Temple Pads

Use the supplied Velcro loop dot pads for comfort. They are the loop part which

can be purchased anywhere.

Turn On and Off

Press the white power button on the inside left temple to turn on. The lenses go

opaque for 1.5 seconds and then clear. Once on, they will sync automatically when they detect the

Emitter signal and turn off automatically when they do not detect sync for five minutes. Otherwise

press the power button for 2 seconds until the lenses flash 3 times and the glasses turn off.

WITH ALL KINDS OF DISPLAYS AND ALL KINDS OF GLASSES/EMITTERS FROM ANYONE, AND

3DTV Corporation

1863 Pioneer PKWY.E.142.Springfield, OR 97477 USA

3DTV Model DLP2 Glasses Instructions

Model DLP2

Some people find that DLP Link glasses will not sync properly

If the image looks strange hit key F7 on a PC running 3D Vision

www.3dtv.jp

TURN OFF EMITTER OR TV

www.3dmagic.com