3DTV SA3 Petunjuk - Halaman 2

Jelajahi secara online atau unduh pdf Petunjuk untuk Kacamata 3D 3DTV SA3. 3DTV SA3 2 halaman. Jp rechargeable glasses

Halaman Cetak

amplifiers such as the IR Blaster etc. may interfere with the glasses OR the Emitter may

interfere with your REMOTES for any such devices.

There may be some slight flicker when watching with bright lights on, especially fluorescents.

Eliminate this by turning them down or off. The 3D images do not look correct.

You may need to reverse the right/left polarity of the images with the TV or projector remote

control, video game, PC software player or the TV or 3DA1 remote.

WITH ALL KINDS OF DISPLAYS AND ALL KINDS OF GLASSES/EMITTERS FROM ANYONE, AND ESPECIALLY

WITH PC SYSTEMS (E.G., NVIDIA 3D VISION OR 3D PLAY) YOU MAY GET PULSING, FLICKERING OR

ERRATIC BEHAVIOR DUE TO INTERFERENCE BY LIGHTS, ESPECIALLY FLUORESCENTS, FANS, HEATERS

AND IN ADDITION TO MINIMIZING THESE, YOU SHOULD ALSO TRY CHANGING THE FREQUENCY OF THE

MONITOR AND TIMING FUNCTIONS, GAMMA, CONTRAST ETC OF THE VIDEO CARD. IF YOU LIVE IN A

COUNTRY WITH 50HZ ELECTRICITY, TRY CHANGING REFRESH TO 100HZ.

TRY OTHER FREQUENCIES IN THE RANGE OF 95 TO 130 IF YOU

EXPERIENCE IMAGE QUALITY ISSUES.

feasible to tape or glue a small piece of IR selective filter (e.g., reddish paper or plastic) over the glasses receiver to

deal with fluorescent lights etc.

PRINT IN THE VIEWING AREA CAN RUIN THE 3D AND PRODUCE

Do NOT put pressure on the lenses when

HEADACHES!!

cleaning!!!

Notice! Noticia! Achtung! Attencao!

eyewear, sunglasses, nor a protective goggle. Do not use them for other purposes (e.g.,driving,

reading, protection from sunlight or ultraviolet light, etc.) as such use may result in injury.

EXPOSE THEM TO DIRECT SUNLIGHT

. > D

ONTO THE SURFACE

O NOT USE CHEMICALS CONTAINING ALCOHOL

SMALL AMOUNT OF WINDOW CLEANER OR DILUTE SOAP SOLUTION

SUPERFINE FIBER OR COTTON FLANNEL

. T

TO REPLACE THE BATTERY

WARNING: Under normal operating conditions, the 3D shutter glasses systems are perfectly safe to use for any duration

you would normally view 3D images on your screen. However, some people may experience discomfort that could signal

problems with the hardware, software and /or physical problem with your visual system. Discontinue use of the 3D glasses

and consult a physician if you experience any of the following: headache, eyestrain, blurry vision, double vision, involuntary

movements, eye or muscle twitching, confusion, loss of awareness of your surroundings, dizziness or disorientation. To

minimize the potential for any of the above symptoms to arise, adjust the ambient lights darker. If you are using a

computer system, set the monitor refresh rate to the highest possible setting. EPILEPSY WARNING: IF YOU OR ANY

MEMBER OF YOUR FAMILY HAS A HISTORY OF EPILEPSY, CONSULT A PHYSICIAN BEFORE USING THIS OR ANY OTHER 3D

PRODUCTS.

Permission is granted to reprint provided credit is given and nothing is added,

changed or omitted.

3DTV Corporation

1863 Pioneer PKWY.E.142.Springfield, OR 97477 USA

3DTV Model SA3 Glasses Instructions

GLASSES MUST BE FREE OF FINGERPRINTS!! ONE

HEAT

FIRE OR WATER

)

WHEN CLEANING TO AVOID SCRATCHING THE LENSES

HE BATTERY IS NOT REPLACEABLE

www.3dtv.jp

I sometimes notice a slight flicker.

WITH ANY SYSTEM

Of course with any IR synced glasses it's also

The 3D glasses are not prescription

. > W

HEN CLEANING

DO NOT SPRAY CLEANER DIRECTLY

SOLVENTS OR SURFACTANTS

. > U

SE A CLEAN SOFT CLOTH

www.3dmagic.com

[email protected]

> D

O NOT

—

USE ONLY A

(

TISSUE PAPER

. > D

O NOT ATTEMPT