Divine Hot Tubs DL-420 DLX Panduan Pra-Pengiriman - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Pra-Pengiriman untuk Bak Mandi Air Panas Divine Hot Tubs DL-420 DLX. Divine Hot Tubs DL-420 DLX 5 halaman.
Halaman Cetak
Delivery
Your Deluxe Series hot tub will be delivered to the
curbside of your home. You will need to arrange
to have your hot tub placed in your desired loca-
tion and the connection of the electrical circuits. In
most cities, permits are required for the installation
Review the path that your hot tub will take through
your property along with the size of the hot tub to en-
sure you have enough clearance. Refer to the chart
below for the height, width and depth of a packaged
hot tub on a pallet. If there are stairs or other ob-
stacles, the hot tub will have to travel over to get to
the site, additional clearances may be required. Use
the supplied measurements to help you determine
the best location for your new hot tub.
Hot Tub
Size of Hot Tub Only
(Width, Length, Height)
DL-1040 DLX
39.5" x 92.5" x 92.5"
(100.33" x 235 x 235 cm)
DL-420 DLX
34.5" x 76" x 84"
(87.63 x 193 x 198 cm)
DL-5SE DLX
34.5" x 84" x 92.5"
(87.6 x 213 x 235 cm)
© Copyright August, 2010. All rights reserved.
of electrical circuits.
When your hot tub
delivery
company
calls to set up a deliv-
ery appointment, you
may choose to make
arrangements
with
them to place your
hot tub for an addi-
tional fee. If that is
not a service they can
provide, we recom-
mend consulting pro-
fessionals who have
experience
moving
large items.
Size of Hot Tub on Pallet
(Width, Length, Height)
41.5"
95"
98"
x
x
(105 x 241 x 249 cm)
36"
87"
82"
x
x
(91 x 221 x 208 cm)
38" x 98" x 91"
(96.52 x 249 x 231.14 cm)
Site selection and preparation
The location of your hot tub is entirely up to you.
Carefully read these instructions for various ideas of
locations that your new hot tub may be placed.
By the time you have made your hot tub purchase,
you probably have a spot already picked out. Prior
to the hot tub delivery, please verify the following:
• Always place the hot tub on a compacted and level
surface. The best surface is a level concrete pad. A
hot tub, full of water, can weigh a great deal. Please
ensure the spot can support the weight.
• Make sure to level your hot tub before filling it.
• Locate the equipment panel. The system pack,
drain valve, owner's manual and optional ozone
generator are usually located all in the same area.
Be sure that the connections are tightened during
draining. Water inside the system pack will cause
the pack to fail and the breaker to trip.
• The panels, on all four sides, are removable. Be
sure to have access on all four sides.
• Be sure to have easy access to the circuit breaker
in the sub panel (240 volt models).
• Never let water into the sub panel (240 volt models),
or into the electrical outlet that your hot tub is
plugged in to. Your 240 volt hot tub's sub panel is
rain tight when installed correctly with the door
closed.
Outdoor and patio installation
2