Divine Lighting 4Ray Panduan Pengguna - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan DJ Divine Lighting 4Ray. Divine Lighting 4Ray 3 halaman.

Thank you for choosing our LED effect light. For safety, please

read this user's manual carefully before use.

I．Installation:

1. This light can will operate under voltage conditions of AC100V~~230V/50Hz/60Hz.

2. Only use this product in a well-ventilated environment.

3. Always keep this light at least 0.5 meters from any flammable materials.

4. Never install, dismantle, or maintain this light when it is powered.

5. The packing list of this light is as follows:

1) Light ---------------------------------------------------------------1 pcs

2) Power Cable-----------------------------------------------------1 pcs

3) User's Manual---------------------------------------------------1 pcs

II．Product Description

This product uses high-intensity LED's as the light source, which are rich in color, shock-

proof, long lasting. It has low heat output and low power consumption. It can project a variety

of patterns on the floor, ceiling, walls, or through smoke/haze.

including: sound active, master, slave mode, automatic, or DMX512. It features

dimming from 0-100%, strobe from fast to slow, and large range of the light output. Internal

programs and DMX channel are set by DIP

III. Instructions:

This unit has a variety of operating modes. To change the mode, press the button "Enter". With

each press of the "Enter" button, the unit will cycle through the following six modes.

1. DMX Operation (d.001): If you have a DMX controller and DMX cable (neither included), you

may operate the unit remotely. To use DMX mode, set the DMX start channel for this unit to

match the DMX start channel on the controller. The default is at channel 1 (d.001). You may

adjust the start channel by pressing "UP" or "DOWN" and the pressing "ENTER" when the

desired channel is obtained. The DMX channels that may be manipulated by the controller are:

Channel 1 Built-in function selector

Channel 1 Values

Channel 2 Produces different patterns

Channel 3 Adjusts the speed of pattern changes

Channel 4 Strobe and strobe speed

switches.

0-2

Off

3-227

Scanning Modes

228-251 Synchronous Mode

252-255 Sound Active Mode

www.divinelighting.com

It has several modes,

electronic

4Ray Version 1.0