Divine Lighting Hyper 363Z Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Perlengkapan Lampu Divine Lighting Hyper 363Z. Divine Lighting Hyper 363Z 12 halaman.

www.divinelighting.com

Slave：Daisychain all the slave units to the master unit using DMX cable. Set all

slaves to DMX mode and address them to channel 1 (A001).

 XLR cable：(DMX Cable)

XLR/DMX connections are connected male to female, as shown below:

pin 1:ground,pin 2: negative signal, pin 3: positive signal

Note：In order to avoid failures and interference with signal transmission，use a

terminator plug. Between pins 2 and 3, connect a resistance120Ω（1/4W） at the end

of the DMX connecting as below:

 Conversion between 3-pin and 5-pin XLR



If the output cable of DMX 512 controller is the 5-PIN, please use a 5-PIN to 3-PIN

adapter.

9. XLR Cable Connections

Hyper 363Z v1.0