esera 12002 Konfigurasi - Halaman 3

Jelajahi secara online atau unduh pdf Konfigurasi untuk Peralatan Perekaman esera 12002. esera 12002 7 halaman.

Halaman Cetak
Art. No. 12002
6
Start "ESERA CONFIG TOOL 1"
Connect the eBus coupler Ethernet to your IP network and a suitable
power supply (9-30VDC min. 0.5A) and switch it on.
The green LEDs on the front panel (PWR) and inside the network socket should light up.
Start the "ESERA CONFIG TOOL 1".
•
Click on the button "Search" to search the eBus coupler in the Ethernet network.
•
Another search field opens. Click on the "Search" button. The search may take a few seconds. It is not
necessary to enter anything in the search mask here.
All rights reserved. Reprinting, including excerpts, not permitted without the express consent of ESERA GmbH.
Subject to technical changes.  ESERA GmbH 2023
www.esera.de
12002 V2.0 R1.1 configuration ETH
Page 3 from 7