esera automation 11140 Panduan Pengguna
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Unit Kontrol esera automation 11140. esera automation 11140 5 halaman. 1-wire extender 1 distribution module rj45 for 1-wire bus system
Art. No. 11140
Performance characteristics
Distributor for 1-Wire Network with RJ45 connectors
6 x RJ45 modular sockets for output
Input via connection via Push In terminal
Distributor for 1-Wire network or telephone cable
Standard compliant socket assignment
Designed for top hat rail mounting
Blocking capacitor for 5V power
Typical fields of application
Sub-distributor for 1-Wire Network
distribution cabinet
Patch field for test setups
Adapter from open cable ends to network cable
1
Introduction
Before you start mounting the 1-Wire Extender 1 and putting the device into operation, read these Mounting and
Operating Instructions carefully until the end, especially the Safety Instructions section.
2
Product description
A CAT network cable is ideal for cabling a 1-Wire network. The 1-Wire Extender 1 builds on this point and
provides a practical and small network distributor.
The 1-Wire Extender 1 is a very narrow network distributor based on a DIN rail. This saves valuable space in
distribution cabinets. The narrow 1-Wire Extender 1 may also save an Ethernet patch panel, which is otherwise
often used for 1-Wire Network cabling.
The 1-Wire Extender 1 greatly accelerates and extremely simplifies the installation and cabling of 1-Wire
networks. It can be used, for example, in the area of a floor distribution as a star point of living area sensors of
different rooms. The use of standard CAT network cables eliminates wiring errors caused by terminal connections
or "luster terminals".
Our 1-Wire living area sensors with RJ45 connection and the 1-Wire Extender 1 form a coordinated cabling
system.
The 1-Wire Extender 1 supports the tree or star topology. All RJ45 sockets are connected in parallel.
For coupling to control systems, we recommend the use of an ESERA 1-Wire Controller or 1-Wire Bus Coupler.
The 1-wire controller in particular simplifies the software connection enormously due to the many automatic
functions.
No software is required for this module.
All rights reserved. Reproduction as well as electronic duplication of this user guide, complete or in part, requires the written consent of
ESERA GmbH. Errors and technical modification subject to change. ESERA GmbH, ESERA-Automation 2020
www.esera.de
User guide
1-Wire Extender 1
Distribution module RJ45
for 1-Wire Bus system
11140 V2.0 R1.0 Manual
Page 1 of 5