Acoustic Signature CARTRIDGES Buku Petunjuk

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Peralatan Industri Acoustic Signature CARTRIDGES. Acoustic Signature CARTRIDGES 2 halaman.

CARTRIDGES

Instruction Manual

Mounting the MM cartridge

Remove stylus unit with stylus guard before

working with leads and screws. Handle all

parts carefully. (fig. 1-2)

Note colours and channel indications on

rear side of the body for correct connection

of the tone arm leads. (fig. 3)

The packing contains a pair of screws with a

thread length of 5 mm. The screws are to be

used with headshell thicknesses of max.

3.5 mm. The MM threaded mounting plate

has a thickness of 3 mm.

To check that you are using the right length

of screws – please observe that screws

must not touch the body under the mounting

plate – look into the small openings on each

side of the body. (fig. 4)

Do not tighten screws completely before the

stylus unit has been remounted (fig. 1) – to

adjust stylus overhang refer to the record

player or tone arm manual and cartridge di-

mensions. (fig. 5)

Never overtighten screws and never use

aluminium screws, as they can get stuck in

the threaded holes of the mounting plate.

Note: If excessively long screws are used

and are pressing against the body material,

this may influence channel separation and

could damage the cartridge body. In case of

such damage the warranty will be void.