3DUpFitters CR-10 S4 Panduan Instalasi - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Rak dan Dudukan 3DUpFitters CR-10 S4. 3DUpFitters CR-10 S4 15 halaman. Enclosure kit

If you can't see through the plastic, please don't

panic! What you're seeing is just the plastic or paper

protective covering.

When plastic sheets are manufactured they are covered

by either a paper (brown colored) or plastic (white)

covering to protect against scratches. Follow the

directions below to remove the cover and discover the

beautiful plastic underneath.

The basic process follows this iterative pattern for the

acrylic panels. The wood panels don't have covers,

and so you can just connect those directly. Take the

acrylic panel out and lay it down ﬂat on a table. Then,

CAREFULLY, SLOWLY, and with DELIBERATION

remove the covering on both sides. Pull horizontally

to the sheet to reduce the lateral forces that would bend the acrylic.

Connecting screws should be tightened only a little more than hand tight. Use enough force

and even this high quality acrylic will crack.