Clearfield FieldSmart FDP Panduan Instalasi - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Kotak Kabel Clearfield FieldSmart FDP. Clearfield FieldSmart FDP 17 halaman. Indoor/outdoor wall boxes

FieldSmart FDP Indoor/Outdoor Wall Boxes
Installation Manual
Cleaning the Ferrule
Lightly moisten the fiber optic swab (2.5mm/38542F or 1.25mm/38040)
by spotting a small amount (about 1") of Electro-Wash PX or
Electro-Wash MX pen onto the QbE. Hold the swab, 1 side down to the
wetted area and hold for a count of 1-2-3-4-5. (Figure 4)
Insert swab into side of ferrule, wet side to the ceramic ferrule and
circle around 2-3 times and remove. Turn swab to dry side and repeat.
(Figure 5)
Cleaning the Mate Through an Adapter AND the Adapter Itself
Lightly moisten the fiber optic swab (2.5mm/38542F or 1.25mm/38040)
by spotting a small amount (about 1") of Electro-Wash PX or
Electro-Wash MX pen onto the QbE. Hold the tip of the swab onto the
wetted area and hold for a count of 1-2-3-4-5.
Insert the swab into the adapter to the connector, press lightly against
the connector, twist 2-3 times, remove and discard.
Dry with a second dry swab.
Inspect, repeat cleaning if necessary, and test for signal strength.
Use additional swabs to clean inside the actual adapter. Moisten
swab, like above, and insert through hole and remove while twisting.
(Figure 6)
12
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeClearfield.com • [email protected]
_________________________________________________________
Manual 022793 REV A - March 2022
Figure 4
Figure 5
Figure 6