ABC Office Vector 06502 Panduan Pengguna - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sistem Keamanan ABC Office Vector 06502. ABC Office Vector 06502 13 halaman. Shoplifting protection

Halaman Cetak

POSITIONING THE SYSTEM

6. Position the system a

minimum of 18" (Inches) from

the doorframe and on the side

closest to the door handle.

7. Cut the rubber molding to the

length that will allow it to cover

the wire from the wall to the

system. You must cover the

wire, using a metal pancake

molding If the wire is in an

area where it will be walked

upon.

8. Insert the system power wire

into the rubber pancake

molding through the slit on the

back. Using double sided tape

fasten the rubber molding to

the floor.

9. Plug the power supply into the

closest outlet. We do not

recommend using an

extension cord for the system.

10. Test the system by placing

one of the hard tags into the

system. The system will beep

approximately 1-1/2 seconds

then reset. If a hard tag is held

in the system it will continue to

alarm.

abcoffice

www.abcoffice.com

18 Inches

Minimum

1-800-658-8788