ESI 5 Series Petunjuk Pengguna - Halaman 14

Jelajahi secara online atau unduh pdf Petunjuk Pengguna untuk Termostat ESI 5 Series. ESI 5 Series 20 halaman. Wifi wireless programmable room thermostat
Juga untuk ESI 5 Series: Petunjuk Untuk Menginstal dan Menggunakan (20 halaman)

Halaman Cetak

N.B. It is recommended to leave this setting in the default

4.3

Resetting the unit will return the thermostat to default

setting. The time, date and landlord service settings will all be

maintained.

ESRTP5WIFI_User_instructions_AW.indd 14

OFF mode as heat generated by the thermostat's power

supply and LED will affect temperature measurement.

A deviation of up to 3.5°C may occur, which will be

calibrated automatically by the unit within 30 minutes

of first connecting the thermostat. It is recommended

to leave the thermostat to climatise for 40 minutes

before user operation. If set permanently ON, the light

will automatically switch to a lower light setting and be

dimmer.

Resetting the Unit (rESE)

1. Press and hold

dial until display shows rESE then press .

2. The display will show - - - -. Press

the display will show LOAd. If the reset is successful, the

unit will return to the homescreen after 2 seconds. If the

reset is unsucessful, the unit will display FAIL. Either

press

to attempt again or press

previous menu.

until the display shows tInE. Turn the

again to confirm and

to return to the

17/06/2019 13:43