ESI ESRTP4 Petunjuk Pengguna - Halaman 14

Jelajahi secara online atau unduh pdf Petunjuk Pengguna untuk Termostat ESI ESRTP4. ESI ESRTP4 20 halaman. Programmable room thermostat
Juga untuk ESI ESRTP4: Panduan Petunjuk Instalasi (16 halaman)

Halaman Cetak

5. Repeat steps 3 - 4 for all temperature events.

6. Press A to accept/confirm temperature events and move

to the next day/block of days.

7. Repeat steps 3 - 6 until all days have been set. Then wait

15 seconds to automatically confirm and return to run

mode or press the

All Day Setting

3.4

1. Switch the slider to AUTO.

2. Press the A button under the fascia. The display will now

show AL (All Day).

3. Press the +/– button to set the temperature (increments

of 0.5°c).

4. The mode will quit by 00.00 that day. Press the

Home button to cancel and return to Auto Mode.

Permanent Manual Overrides

3.5

1. Switch the slider to MAN. MAN will appear in the display.

2. Press +/– to adjust the temperature to the desired setting.

This will set a constant temperature 24hrs a day.

3. Switch the slider to AUTO to revert back to Auto mode.

Temporary Manual Overrides

3.6

1. To temporarily override the Programmable Room

Thermostat status or temperature press the +/– buttons

The Programme Events Display (e.g. P1) will no longer

be shown.

2. Press the + button to increase the set temperature

in increments of 0.5°c and/or press the – button to

decrease the set temperature in increments of 0.5°c.

Home button.