ESI Neva Duo Panduan Pengguna - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Perekaman ESI Neva Duo. ESI Neva Duo 16 halaman. 24-bit / 192 khz usb-c audio interface with 2 microphone preamps
Juga untuk ESI Neva Duo: Panduan Memulai Cepat (3 halaman)

ESI Neva Duo Panduan Pengguna
ESI

1. Introduction

Congratulations on your purchase of Neva Duo, a high quality USB-C audio interface to connect
microphones, synthesizers or guitars and to listen with headphones or studio monitors in 24-bit / 192
kHz audio quality that works with your Mac or your PC and as a fully class compliant device even
with many portable devices such as iPad and iPhone (via an adapter like the Apple Lightning to USB
3 Camera Connector). This stylish audio interface is so small, it will instantly become your new
companion on the go and in your studio. Neva Duo is USB bus powered and Plug & Play, just plug
it in and start working. While Neva Duo is a USB-C device and optimized for USB 3.1 operation, it
is also compatible with standard USB 2.0 ports.
1.1 Connectors & Functions
The front, back and top panel of the Neva Duo hardware has these main features:
4
1. Line Hi-Z Switch 1 for input 1 to switch between
Line / Microphone signals and Hi-Z guitar signals.
2. Line Hi-Z Switch 2 for input 2 to switch between
Line / Microphone signals and Hi-Z guitar signals.
3. +48V Phantom Power Switch to provide power
for condenser microphones. When enabled, the
power LED illuminates red, when disabled orange.
4. Direct Monitoring Switch to enable or disable
input monitoring to listen to the input signals.
5. Gain Knob 1 to change the input gain / input level
for input 1. The LED ring indicates the signal
level.
6. Gain Knob 2 to change the input gain / input level
for input 2. The LED ring indicates the signal
level.
7. Headphone Volume Knob to change the output
volume for connected headphones.
8. Master Volume Knob to control the master output
volume of the main line output signal.
9. XLR / TRS Combo Input 1 to connect a
microphone via XLR cable, a line signal via 1/4"
TRS connector or an electric guitar with 1/4" TS
connector.
10. XLR / TRS Combo Input 2 to connect a
microphone via XLR cable, a line signal via 1/4"
TRS connector or an electric guitar with 1/4" TS
connector.
11. Headphone Output to connect headphones.
12. Line Output 2 to connect the right channel of the
master line level output signal via a 1/4" TRS
cable.
Neva Duo