ESI 3V-LX-C4836-30 Series Buku Petunjuk - Halaman 7

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Perabotan Dalam Ruangan ESI 3V-LX-C4836-30 Series. ESI 3V-LX-C4836-30 Series 12 halaman. Victory-lx 3 leg electric table base

Halaman Cetak

1. Digital Keypad

ASSEMBLY

STEP 12

Attach the cross channels to the table.

• Position one U-bracket over each section of cross

channel, between the set screws, as shown (four

brackets total).

• Use the remaining M6x20 Phillips round head

screws (16 total) to fasten the U-brackets to the

work surface.

STEP 13

Attach the digital keypad using the three M3-20

Phillips round head screws.

• Position the digital keypad on the left or right side

of the table, according to user preference.

•

Mount the keypad 1 / " from the front edge of

the table and expand to make flush. This will

prevent overhang and collision with the keypad.

STEP 14

Attach the control unit using the two M5-15 Phillips

round head screws.

• Position the control unit near the back of the

table, on the same side as the digital keypad.

• Be sure that the cable from the keypad can reach

the control unit, and the motor cables can

extend from the control unit to all three motors.

VICTORY-LX 3 LEG ELECTRIC TABLE BASE

M6x20

M3x20

Digital

Keypad

M5x15

Control

Unit

1 / "

MOUNT

FROM EDGE