Camos CM-31AH Buku Petunjuk - Halaman 9
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Aksesori Mobil Camos CM-31AH. Camos CM-31AH 14 halaman. Rear-view system 5” tft lcd monitor & camera
Halaman Cetak
■ CAMERA CM-31/32AH
1. Determine a position and a direction of installation so that the rear view can be
effectively seen on the monitor screen.
2. Fix the camera bracket to the vehicle using the provided adhesive tape and
tapping screws with spring washers.
3. Fix the camera between the camera bracket and sun visor using machine
screws, and adjust the angle of camera and fasten the screws firmly.
4. Run the cable from the monitor to the camera.
CAMERA CONNECTOR
=
⑤
⑥
③
④
①
②
⑦
POWER IN(DC +12V)
HEATING B+ (DC +12V)
NC
VIDEO OUT
AUDIO OUT
NOR/MIR
GND
< CM-31/32AH >
16
Tapping screw(RH)4x10
Spring washer(M4)
Camera Bracket
Adhesive tape
Safeguard tape
9. Changing Remote Control Battery
Pull battery case in the direction of the arrow.
①
Place a battery with the + sign upward on
the battery case.
②
Put the battery case back into the remote
③
control in the direction of the arrow.
Machine screw(ASS'Y)
(PH) M3 X 8
Sun visor
Machine screw
(PHW) M3 X 6
CDS sensor
IR-LED
Spring
Washer(M3)
Mic
(No. CR2025)
17