ClearOne Beamforming Microphone Array 2 Panduan Memulai Cepat - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Mikrofon ClearOne Beamforming Microphone Array 2. ClearOne Beamforming Microphone Array 2 12 halaman. Group microphone for professional conferencing
Halaman Cetak
UPDATE BFM2 FIRMWARE
1.
Connect the P-Link cable between the CP2 units and the BFM2s.
2.
Connect the CP2 units with CONVERGE Pro 2 CONSOLE.
3.
Open the Firmware Loader screen.
4.
Browse for the bf2_mic.mdo file.
5.
Download the BFM2 firmware.
6.
The BFM2(s) will default and reboot after the download of firmware.
7.
Units are fully upgraded. (All BFM2 units connected via the P-Link
on the site are simultaneously updated.)
8.
Restore the saved site file to the system using CONVERGE Pro 2
CONSOLE.
TEST THE BFM2
The BFM2 must be added to the site using the CONVERGE Pro 2
CONSOLE software. This software also provides the capability of
configuring the beams (enable/disable) and other characteristics
available in Configuration mode. Refer to the online help available with
the CONVERGE Pro 2 CONSOLE software.
V
& m
olume
ute
These controls are available through the controller configured for your
CONVERGE Pro 2 site.
QUICK-START GUIDE
7