Altocraft AG370 Panduan Operator - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Operator untuk Penggiling Altocraft AG370. Altocraft AG370 14 halaman. 4-1/2"

IMPORTANT SAFETY INSTRUCTIONS

10. Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep

your hair, clothing,and gloves away from moving parts. Loose clothes, jewelry,

or long hair can be caught in moving parts.

11. Avoid accidental starting.Be sure switch is off before plugging in. Carrying

tools with your finger on the switch or plugging in tools with the switch on invites

accidents.

12. Remove adjusting keys before turning the tool on. A wrench or a key that is

left attached to a rotating part of the tool may result in personal injury.

13. Do not overreach.Keep proper footing and balance at all times. Proper

footing and balance enables better control of the tool in unexpected situations.

14. Use safety equipment. Always wear eye protection. Dust mask, non-skid

safety shoes, hard hat, or hearing protection must be used for appropriate

conditions.

TOOL USE AND CARE

15. Use clamps or other practical way to secure and support the work piece to a

stable platform. Holding the work by hand or against your body is unstable and

may lead to loss of control.

16. Do not force tool.Use the correct tool for your application. The correct tool

will do the job better and safer at the rate for which it is designed.

17. Do not use tool if switch does not turn it on or off. Any tool that cannot be

controlled with the switch is dangerous and must be repaired.

18. Disconnect the plug from the power source before making any adjustments,

changing accessories, or storing the tool. Such preventive safety measures

reduce the risk of starting the tool accidentally.

19. Store idle tools out of reach of children and other untrained persons. Tools

are dangerous in the hands of untrained users.

20. Maintain tools with care. Keep cutting tools sharp and clean. Properly

maintained tools with sharp cutting edges are less likely to bind and are easier to

control. Do not use a damaged tool.Tag damaged tools"Do not use" until

repaired.

21. Check for misalignment or binding of moving parts, breakage of parts,and

any other condition that may affect the tool's operation. If damaged,have

the tool serviced before using. Many accidents are caused by poorly

maintained tools.

22. Use only accessories that are recommended by the manufacturer for your

model. Accessories that may be suitable for one tool may become hazardous

when used on another tool.

SERVICE

23. Tool service must be performed only by qualified repair personnel. Service

or maintenance performed by unqualified personnel could result in a risk of injury.

24. When servicing a tool, use only identical replacement parts. Follow

instructions in the Maintenance section of this manual. Use of unauthorized

parts or failure to follow Maintenance instructions may create a risk of electric

shock or injury.