Balzano EF408E Buku Petunjuk - Halaman 8
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Pengolah Makanan Balzano EF408E. Balzano EF408E 9 halaman.
Halaman CetakEN |
Cleaning
- Always unplug the appliance before you remove accessories or clean the motor unit.
- You can quickly and easily pre-clean the food processor bowl and blender jar with the pulse button. Simply
add some water and washing-up liquid to the dirty bowl or jar and secure the lid. Then use the pulse button
until the bowl or jar is clean. When you pre-clean the food processor bowl in this way, make sure the food
processor blade is assembled in the bowl.
EN |
Environment
Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an
official collection point for recycling. By doing this, you help to preserve the environment.
EN |
Troubleshooting
Question
The appliance does not go on.
The appliance suddenly stops
running.
The motor of the device runs
but cone of the citrus press
does not turn.
Can I clean all removable parts
in the dishwasher?
What does 'pulse' mean?
Can I pour boiling hot
ingredients into the blender jar?
Why does the motor produce an
unpleasant smell during
processing?
What should I do when the blade
unit or motor gets blocked during
processing?
What should I do if the blender
leaks?
Why does the ice function not
work?
Make sure that all assembly indications (on the lid of the
bowl, on the bowl, on the blender jar and on the motor unit)
are aligned.
The lid of the bowl may have become undone during a heavy
processing job. Close the lid properly. The appliance
immediately starts working again. The processing job is too
heavy. Set the control knob to OFF to switch off the
appliance and remove the mains plug from the wall socket.
Then let the appliance cool down to room temperature. lug in
the appliance and switch it on again. Process smaller
batches.
Please check if you have inserted the tool holder. citrus press
properly. Please check if you have attached the sieve of the
citrus press properly.(Indication on the sieve points to
indication on the handle of the bowl)
Yes, except the motor unit and the protection cap for the
blade unit.
When you press the Pulse button, the appliance will run at its
highest speed a s long you keep pressing the button. Using
the Pulse button is recommended if you want to have more
control over the processing job, for instance when you are
chopping.
No, let the liquids or ingredients cool down to 80°C to avoid
damaging the accessories.
It is very common for a new appliance to give off an
unpleasant smell or emit some smoke the first few times it is
used .This phenomenon will stop after you have used the
appliance a number of times. The appliance may also give off
an unpleasant smell or emit some smoke if it has been used
too long. In that case you have to switch the appliance off
and let it cool down for 60 minutes.
Switch the appliance off and use a spatula to dislodge the
ingredients that block the blade unit. We also recommend
processing a smaller quantity.
Switch the appliance off and pour out the ingredients. Then
remove the blade unit interface. Check if the sealing ring has
been assembled properly on the blade unit.
If you want to use the ice button, first turn the control knob to
position ON. Then push the ice button.
Answer