Alton EVOLUTION EVSTA2506M Buku Petunjuk - Halaman 11

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Kit Rumah Kaca Alton EVOLUTION EVSTA2506M. Alton EVOLUTION EVSTA2506M 18 halaman. Aluminium staging and shelving

Halaman Cetak

Staging Extension

Join at A-frame

Once you are happy with the

positioning of the staging arms

you can start to fit the staging

slats. Place these upside down

on the staging arms, Insert 1 bolt

into the channel (diagram 10) for

every arm. Now turn the first slat

over and locate the bolts with

the arms, start at one end loosely

fitting the nuts to the bolts.

Repeat this for the second slat

(diagram 16). You now need to

make sure everything is square

and in line (diagram 11) then

tighten all the nuts on the

staging. You can now repeat this

for the remaining slats.

Diagram 16

It is very straight forward to fit the

staging past an A-frame. With

the staging extension pack you

will find an extra wide staging

arm, this is also shorter than the

others supplied so should be easy

to spot. Measure up from the

floor as you did before and attach

the small bracket. Now fit the

staging arm with a diagonal

support. Bolt the arm to the

small bracket and screw the

support to the A-frame side bar.

Make sure this is level front to

back and also level with the next

staging arm along.

50mm