Alton ECOMAX ELG03 Buku Petunjuk - Halaman 10
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Pemangkas Alton ECOMAX ELG03. Alton ECOMAX ELG03 14 halaman. 18v cordless string trimmer
Halaman Cetak
NOTE: ABOUT BATTERY CHARGING:
The battery should be charged at ambient temperatures between 10 and
0 1 ）
40°C. (ideally around 20°C).
After discharging the battery, please wait 10 minutes for the battery
0 2 ）
cool down before charging.
After charging, allow 15 minutes for the battery to cool before use.
0 3 ）
Ensure that the charger is disconnected from the mains supply after use,
0 4 ）
and is stored correctly.
Do not leave batteries on charge for extended periods and never store
0 5 ）
batteries on charging.
The Battery Charger monitors battery temperature and voltage while
0 6 ）
charging. Remove the battery once charging is complete to maximise
charge cycles of the battery and not waste power.
Batteries can become faulty over time, individual cells in the battery can
0 7 ）
fail and the battery could short. The charger will not charge faulty
batteries. Use another battery if possible, to check correct functionality
of the charger and purchase a replacement battery if a faulty battery is
indicated.
Do not store lithium-ion battery packs in a discharged state over a long
0 8 ）
period as this can damage the lithium-ion cells.
For long-term storage, store batteries in a high charge state disconnected.
0 9 ）
The capacity of batteries will reduce over time. After 100 charge cycles,
1 0 ）
the battery�s operation time and the maximum torque performance of the
driver will slightly reduce. This decline will continue until the battery has
minimal capacity after 250 charge cycles. This is normal and not a fault
with the battery pack.
When battery pack is not in use, keep it away from other metal objects,
1 1 ）
like paper clips, coins, keys, nails, screws or other small metal objects,
that can make a connection from one terminal to another. Shorting the
battery terminals together may cause burns or a fire.
Under abusive conditions liquid may be ejected from the battery; avoid
1 2 ）
contact. If contact accidentally occurs, flush with water. If liquid contacts
eyes, additionally seek medical help. Liquid ejected from the battery may
cause irritation or burns.
If the tool will not be used for long periods of time, charge the battery
1 3 ）
every 3-6 months.
15
ADDITIONAL SAFETY NSTRUCTIONS FOR YOUR BATTERY
CHARGER
01. Before charging, read the instructions.
to
02. For charging Li-ion battery packs only.
03. If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
04. After charging, disconnect the battery charger from the supply mains. Then
remove the chassis connection and then the battery connection.
05. Do not charge a leaking battery.
06. Do not use chargers for work other than those for which they are designed.
07. Before charging ensure your charger matches the local AC supply.
08. The charging device must be protected from moisture.
09. Do not use the charging device in the open.
10. Do not short out the contacts of battery or charger.
11. Respect the polarity"+/-"when charging.
12. Do not open the unit and keep out of the reach of children.
13. Do not charge the batteries of other manufactures or ill-suited models.
14. Ensure that the connection between the battery charger and battery is
correctly positioned and is not obstructed by foreign bodies.
15. Keep battery chargers slots free of foreign objects and protect against dirt
and humidity. Store in a dry and frost-free place.
16. When charging batteries, ensure that the battery charger is in a well-
ventilated area and away from inflammable materials. Batteries can get
hot during charging. Do not overcharge any batteries. Ensure that
batteries and chargers are not left unsupervised during charging.
17. Do not recharge non-rechargeable batteries, as they can overheat and
break.
18. Charge only battery pack of the same model provided by ECOMAX and of
models recommended by ECOMAX.
TRANSPORTATION AND STORAGE
WARNING! Remove the battery pack from the machine before tranpor-
tation and storage.
STORE THE MACHINE
Clean the machine before storage.
Make sure that the motor is not hot when you store the machine.
Make sure that the machine does not have loose or damaged parts. If it is
necessary, do these steps.
16