ClearSounds CL-3108 Panduan Pengguna - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Telepon Tanpa Kabel ClearSounds CL-3108. ClearSounds CL-3108 16 halaman.

Halaman Cetak
Last number redial
Press
button, then press
R/P
CH button
During the conversation, the phone will scan the clear channel
automatically. If you still hear noise or static, press the
a clearer channel.
NOTE:
It takes about 2 seconds for the unit to scan a channel.
Pause function
This function allows you to insert a temporary pause during dialling
sequence. For example, dialling an international number (e.g. 011-886-
22-795-1234), some telephone company systems will not register the
entire number entry without a pause between the prefix numbers. You
may have to dial 011-
R/P
, dial 886 -
the phone number to register with the telephone company's system
and complete the call.
Keys confirmation tone
Every time you press a key, your handset acknowledges it with a key
tone.
Battery low warning and shut down protection
Once the battery voltage is low, the low battery icon will turn on.
The low battery warning tone will also be generated if the handset is in
talk mode. You can press
button to return to standby mode, then
replace it on the base to recharge.
15
button to redial the last dialled number.
CH
button to find
R/P
. This allows adequate timing for
B
F
ASIC UNCTION
LCD contrast setting
Press
SEL
button, then
2
button, and then the current level
will show on the LCD. Press
adj X(X=1,2,3,4)
desired level and press
SEL
button once more to confirm and exit.
Ringer setting
Press
SEL
button, then
3
button, and then the current mode
will show on the LCD. Press
ON/OFF
activate/deactivate the ringer function. Press
to confirm and exit.
Time setting
Press
SEL
button, then
4
button, and then the
the LCD and the digit for
MONTH
get the desired digit then press
next item (the sequence is
setting, press
SEL
button to confirm and exit.
Receiver volume and tone setting
You can increase the volume and adjust the receiver tone according
to your own hearing requirements. The
select
switch within the battery compartment allows extra-receiver
and tone function to be activated or not during the conversation. If
you move the
receiver volume and tone select
position, the amplify function will be activated and the LED indicator
will lit up, you can adjust the receiver tone and receiver volume
button to get the desired volume level.
12
contrast
s
t
or
button to get the
s
t
or
button to
SEL
button once more
will show on
SET TIME
s
t
will flash. Press
or
button to
SEL
button to confirm and enter the
). After the
MONTH-DAY-HOUR-MINUTE
receiver volume and tone
switch to up
B
U
EFORE SING
RING