ClearSpan CL108543 Manual - Halaman 2
Jelajahi secara online atau unduh pdf Manual untuk Tenda ClearSpan CL108543. ClearSpan CL108543 17 halaman.
Halaman CetakCLEARSPAN
FABRIC STRUCTURES
™
YOU MUST READ THIS DOCUMENT BEFORE YOU
BEGIN TO ASSEMBLE THE SHELTER.
Thank you for purchasing this ClearSpan™ shelter. When properly assembled
and maintained, this product will provide years of reliable service. These
instructions include helpful hints and important information needed to safely
assemble and properly maintain the shelter. Please read these instructions
before you begin.
If you have any questions during the assembly, contact Customer Service for
assistance.
SAFETY PRECAUTIONS
•
Wear eye protection.
•
Wear head protection.
•
Wear gloves when handling metal tubes.
•
Use a portable GFCI (Ground Fault Circuit Interrupter) when working with
power tools and cords.
•
Do not climb on the shelter or framing during or after construction.
•
Do not occupy the shelter during high winds, tornadoes, or hurricanes.
•
Provide adequate ventilation if the structure is enclosed.
•
Do not store hazardous materials in the shelter.
•
Provide proper ingress and egress to prevent entrapment.
ANCHORING INSTRUCTIONS
Prior to assembling this shelter, please read the anchoring precautions and
instructions included with the kit. Anchoring instructions are included in the
MUST READ document. You must anchor the building after the frame is
assembled and before the cover is installed.
WARNING: The anchor assembly is an integral part of the shelter
construction. Improper anchoring may cause shelter instability and
failure of the structure. Failing to anchor the shelter properly will void the
manufacturer's warranty and may cause serious injury and damage.
2
LOCATION
Choosing the proper location is an important step before you begin to assemble
the structure. Always consult local and regional building codes before you
begin.
The following suggestions and precautions will help you determine whether your
selected location is the best location.
•
Never erect the structure under power lines.
•
Identify whether underground cables and pipes are present
preparing the site or anchoring the structure.
•
Location should be away from structures that could cause snow to drift on
or around the building.
•
Do not position the shelter where large loads such as snow and ice, large
tree branches, or other overhead obstacles could fall.
SITE
After choosing a location, proper preparation of the site is essential. The
following site characteristics will help ensure the integrity of the structure.
•
A level site is required to properly and safely erect and anchor the frame.
•
If the site is not level, use footings to provide a secure base for the
structure. Pre-cast concrete blocks, pressure-treated wood posts, or poured
footings are all acceptable when properly used.
IMPORTANT: Some soil types and locations may require footings to
properly support and anchor the building. Consult a qualified professional
who is familiar with building similar structures to determine whether a
footing or other foundation is required in your area.
•
Drainage: Water draining off the structure and from areas surrounding the
site should drain away from the site to prevent damage to the site, the
structure, and contents of the structure.
WARNING: The individuals assembling this structure are responsible for
designing and furnishing all temporary bracing, shoring and support needed
during the assembly process. For safety reasons, those who are not familiar
with recognized construction methods and techniques must seek the help of
a qualified contractor.
before
Revision date: 09.08.09