ClearSpan Storage Master Solarguard Buku Petunjuk - Halaman 16
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Tenda ClearSpan Storage Master Solarguard. ClearSpan Storage Master Solarguard 20 halaman. Poly shelter round “hut” style 30' wide x 15' high x 48' long
Halaman Cetak
Section H - Install Main Cover
Step 1: Using a Tek screw, fasten a ratchet to the front of the end conduit about 10" in from the end
of the rafter. Fasten ratchets to the remaining 3 corners.
Step 2: On the side of the shelter, identify the rafters where you will install side ratchets.
These locations are at the second, the next to the last, and every other rafter in between.
Step 3: Fasten 2" ratchets to the outside of these rafters on both sides of the shelter. Remove the
machine bolt, place ratchet, then reinstall bolt through ratchet, rafter and foot and tighten.
Ratchets are located on the same rafters on both sides of the shelter. Repeat so you have
ratchets on both sides of the shelter opposite each other.
Step 4: Make up a pair of cover conduits each the length of your shelter. Start each with an
unswaged section and add swaged sections to arrive at the correct length.
Page 16