ClearSpan 105366 Manual - Halaman 6

Jelajahi secara online atau unduh pdf Manual untuk Kit Rumah Kaca ClearSpan 105366. ClearSpan 105366 13 halaman.

CLEARSPAN

END FRAME KIT

™

INSTALL ANGLE ANCHORS

Gather the parts:

•

#105232 Angle Anchors

View the diagrams to measure and determine the

location of the two (2) angle anchors for the two door

jambs.

1. Mark the center of the shelter's end rafter by

measuring the distance between the two ground

posts and dividing in half.

2. Measure 13-7/16" in both directions from the center

mark and push the two (2) angle anchors into the

ground leaving at least 3" exposed. Anchors must

be straight and evenly spaced. Refer to the diagram

below.

NOTE: Place the anchors so the door jamb sits

directly in line with the ground posts.

3. Continue with the information on the following page

to assemble and install the door jambs and header.

Ground

Post

Diagram shows position of angle anchors measured from the center mark.

TOP VIEW

13-7/16"

Door

Jamb

105232

Angle

Center

Anchor

Outside of Shelter

Ground Level

Drawing may show a different but similar model.