ClearSpan 108986 Manual - Halaman 4

Jelajahi secara online atau unduh pdf Manual untuk Kit Rumah Kaca ClearSpan 108986. ClearSpan 108986 17 halaman. End frame kit 36' wide x 16' 2" high

CLEARSPAN

END WALL FRAMING KITS

™

OVERVIEW

This section describes assembling your end frame

kit. For details, please see section "Assembling the

End Frame Kit Components." See illustration below to

identify main parts of end frame kit.

1. Locate the required parts for each assembly

procedure.

2. Assemble and attach all end wall framing.

3. Prepare and attach end panel (if equipped).

4. Prepare and install doors (if equipped).

QH1330

Bracket

ATTENTION: The QH1330 bracket shown in the detail

above (left) is used to secure the vertical frame tube to a

concrete slab. It is also used to secure a base tube (not

included) between each vertical tube. It is not used when

vertical tube is set in the concrete pier.

ClearSpan™

End Frame Kit

ATTENTION: End frame spacing depends on the door sizes

and may differ from what is shown in these diagrams. Consult

the End Wall diagrams in the Quick Start section for pipe

identifications and locations.

If you are installing an overhead door, do not attach end framing

within the door opening.

Additional purchase required for end panel and doors.

ground level

Revision date: 11.12.14