ClearSpan Premium Solar Star 104918 Manual Petunjuk Perakitan - Halaman 6

Jelajahi secara online atau unduh pdf Manual Petunjuk Perakitan untuk Kit Rumah Kaca ClearSpan Premium Solar Star 104918. ClearSpan Premium Solar Star 104918 17 halaman. Home-attached greenhouse

Halaman Cetak

2. Secure the frame tubes at each corner using a

corner bracket and 3/4" Tek screws.

NOTE: To maintain the proper dimensions, the frame

tubes for the door and non-door ends must be seated

into the each corner bracket. See above and below

illustrations.

Door (or Non-Door)

Frame Tube

Front (or Back) Frame

Top View of Frame Tubes and Corner Bracket

NOTE: If the metal frame was not assembled on the

recycled plastic lumber frame, set the metal frame on the

plastic frame base.

3. After assembling the metal base and securing it with

the corner brackets, choose the first two panels (as

shown in the following diagram) and set them on the

metal frame.

NOTE: Install the panels with the UV-protected

polycarbonate to the outside and the frame to the inside.

Visit www.ClearSpan.com for additional products and customer assistance.

Door End

Base Frame

Front

Panel

NOTE: The angled panel is installed first and is seated

into the corner bracket. The short, front panel is installed

next and is flush with the front of the angled panel.

Door (or Non–

Door) End

Angled Panel

View is from the inside of the greenhouse looking at the

corner where the panels meet.

4. With the panels set in the corner and the edges tight

together, secure the panels to the corner bracket

using 3/4" Tek screws.

5. Secure the corner with a 3" x 3" square plate.

NOTE: All 3" x 3" square plates are attached to the

greenhouse on the inside using self-tapping screws. See

the photo that follows.

Non-Door End Panel

Front

Panel

Front Panel

Frame Base

5 of 16