Dixon Bayco VR6000 Petunjuk Pemasangan & Pengoperasian - Halaman 4

Jelajahi secara online atau unduh pdf Petunjuk Pemasangan & Pengoperasian untuk Produk Pipa Dixon Bayco VR6000. Dixon Bayco VR6000 4 halaman. Drop elbows

Halaman Cetak

VR6000, VR6200 and VR6000 Drop Elbows

Inspection

Drop elbows can fail to operate if not properly maintained. If the

VR6500 / VR6200 / VR6000 elbow develops any problems, remove

from service and contact your Bayco distributor describing the

difficulty. The distributor will provide further instructions for repair and

warranty of the product.

Elbows should be inspected monthly. Check the adapter-to-elbow O-

ring seal and the flange where the base is attached to the elbow body

for any signs of leakage. Change seals if necessary. Check and

tighten all fasteners periodically. Lubricate the lever stem. Check the

bushings and replace if cracked or worn, and change if required.

Check operation as per above.

Regularly replace bushings. Some Bayco elbows contain polymer

bushings, which protect and extend service life of bronze locking

arms. The bushings are designed to wear (instead of bronze arms)

and should be replaced every few months. Operators must be

encouraged to inspect and replace polymer bushings to obtain

maximum elbow performance and longevity.

Optional Accessories

The following are available as optional accessories for VR6200 and

VR6000 elbows:

Safety Latch Kit #6200SLK (VR6200 only)

Installation instructions are included with the items when ordered for

retrofit.

Dixon Bayco Warranty

For complete warranty information, please refer to the latest

Dixon catalog.

877.582.3569

VR6500/VR6200/VR6000