AIMS PWRINV1800W Manual Petunjuk Perakitan dan Pengoperasian - Halaman 3

Jelajahi secara online atau unduh pdf Manual Petunjuk Perakitan dan Pengoperasian untuk Inverter AIMS PWRINV1800W. AIMS PWRINV1800W 9 halaman.

Observe work area conditions. Do not use machines or power tools in damp

or wet locations. Don't expose to rain. Keep work area well lit. Do not

use electrically powered tools in the presence of flammable gases or liquids.

Keep children away. Children must never be allowed in the work area. Do

not let them handle machines, tools, or extension cords.

Store idle equipment. When not in use, tools must be stored in a dry location

to inhibit rust. Always lock up tools and keep out of reach of children.

Use the right tool for the job. Do not attempt to force a small tool or attach-

ment to do the work of a larger industrial tool. There are certain applications for

which this tool was designed. It will do the job better and more safely at the

rate for which it was intended. Do not modify this tool and do not use this tool

for a purpose for which it was not intended.

Use eye protection. Always wear ANSI approved impact safety goggles when

using tools.

Do not overreach. Keep proper footing and balance at all times. Do not reach

over or across running machines.

Maintain tools with care. Keep tools sharp and clean for better and safer

10.

performance. Follow instructions for changing accessories. Inspect tool cords

periodically and, if damaged, have them repaired by an authorized technician.

Disconnect power. Unplug inverter when not in use.

11.

Avoid unintentional starting. Be sure the switch is in the Off position when

12.

not in use and before plugging in any appliance.

Stay alert. Watch what you are doing, use common sense. Do not operate

13.

any tool when you are tired.

Check for damaged parts. Before using any tool, any part that appears dam-

14.

aged should be carefully checked to determine that it will operate properly and

perform its intended function. Check for alignment and binding of moving parts;

any broken parts or mounting fixtures; and any other condition that may affect

proper operation. Any part that is damaged should be properly repaired or

replaced by a qualified technician. Do not use the tool if any switch does not

turn On and Off properly.

Servicing. This device should be serviced only by a qualified technician. This

15.

item does not have any user-replaceable parts,except for fuses.