Dixon Bayco FT590 Series Petunjuk Pemeliharaan & Pengoperasian - Halaman 2

Jelajahi secara online atau unduh pdf Petunjuk Pemeliharaan & Pengoperasian untuk Peralatan Uji Dixon Bayco FT590 Series. Dixon Bayco FT590 Series 6 halaman.

Halaman Cetak

Product Overview

The FT590 series rack test unit is intended for use by loading facility operators to verify the
correct operation of their facility's equipment and systems.
The tester can be used with most rack monitors that will be found at bottom-loading petroleum
distribution facilities throughout the world. The FT590 tester is connected to the rack system
using the industry-typical API 1004 style connection that is used to connect to tank trailers for
loading. Once connected, the FT590 unit will induce electrical signals that should cause the rack
monitor to become permissive. Verifying the rack monitor's ability to reach permissive state
will drastically reduce troubleshooting time by narrowing the failure to either rack-side or
trailer-side.
WARNING – THE FT590 RACK TESTER CAN CREATE UNSAFE LOADING CONDITIONS IF USED
IMPROPERLY. ENSURE IT IS ONLY USED IN A TESTING CAPACITY AND BY TRUSTED PERSONNEL.
Comparison of FT590 models:
Rack Tester
Simulated Overfill system
Model
type
FT590OG
Optic (5 Wire)
FT590OGT
Optic (5 Wire)
FT590TG
Thermistor (2 Wire)
FT590TGT
Thermistor (2 Wire)
REV A 2020/10/15
FT590 SERIES RACK TESTER MANUAL; 11266PA
Simulated Grounding
Device
Yes
Yes
Yes
Yes
877.582.3569
Simulated Trailer
Identification Module
No
Yes
No
Yes
2