DIY VERTICAL HERB GARDEN Panduan Memulai Cepat

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Peralatan Rumput dan Taman DIY VERTICAL HERB GARDEN. DIY VERTICAL HERB GARDEN 2 halaman.

Halaman Cetak

If your yard is short on space, go vertical with a garden wall made from a

section of metal fence, basic lumber and redwood planter boxes.

(4) 2x2 x 8' redwood • (4) 2x6 x 8' redwood • (4) 1x6 x 8' redwood • (1) metal fence panel • concrete

exterior-grade paint-and-primer-all-in-one • paintbrush • spray paint • exterior-grade polyurethane • metal hooks

metal strapping • bolts, washers and nuts • exterior-grade screws • jigsaw • clamps • drill • measuring tape

level • post-hole digger • miter saw or circular saw • soil • herbs • landscape fabric (optional) • hacksaw

Skill Level

Estimated Cost

$200

TOOLS & MATERIALS

STEP 1

Cut Fence Panel. Use a hacksaw

to cut the fence panel to 6'.

STEP 2

Build Frame. Build a frame for

the herb garden. Use two 2x6 x

8' for the legs. To each leg, add

a 2x2 cut to 5'11" for the fence

panel to rest on. We used a

scrap piece of fence to mea-

sure and mark the placement

of the fence and its two 2x2

"sandwich" pieces. Our 2x2s are

attached 1" in from the edge

of the 2x6. Exterior screws are

used to secure the 2x6 and 2x2

together.

STEP 3

Attach Top and Bottom.

Secure the top and bottom to

the legs with screws. The top

should be cut to 52-

" and

the bottom should be 49-

The bottom board will fit within

FOR MORE DIY PROJECTS VISIT LOWES.COM/HOWTO

do it yourself

VERTICAL

HERB GARDEN

Time

1 Day

the leg boards, while the top

will span across the top of the

legs and sit flush with the out-

side edge of the 2x6s. Test-fit

the fence section to make sure

it works.

STEP 4

Paint. Apply exterior-grade

paint-and-primer-all-in-one to

the frame and the remaining

two 2x2s cut to 5'11". Let it all

completely dry. (Painting the

frame before attaching the

fence panel will help keep paint

off the fence panel.)

STEP 5

Add Fence Panel. Add the

fence panel to the frame. It

should slide in for a snug fit.

STEP 6

Secure Fence Panel. Attach

the remaining 2x2s on top of

the fence panel, securing them

continued on next page >