Edgewater Networks 200AE1 Panduan Memulai Cepat - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Gerbang Edgewater Networks 200AE1. Edgewater Networks 200AE1 6 halaman. Network services gateway 200 series
Halaman CetakStep 3 − Plan Your Configuration
The EdgeMarc 200AE1 can be deployed as a gateway router in a network. It can also be
deployed in a network behind an existing firewall. Based on your deployment criteria, consult
the following documents for further configuration:
EdgeMarc 200AE1 Network Service Gateway Hardware Installation Guide
•
VoIP Operating System (VOS) for EdgeMarc User Manual
•
Helpful Hints
Although not recommended, the 200AE1 and IP phones can be installed behind an existing
enterprise firewall. In this instance, the firewall will have to be configured to allow access to and
from the 200AE1's public IP address for the following ports:
Port Type
UDP
RTP
TCP
Telnet
FTP
MGCP
NTP
SIP
IP phones normally point to a local NTP server for their time reference. The NTP port 123
needs to be opened if your network does not have an NTP server.
Note:
Traffic shaping for this configuration is only available if the enterprise data
devices are also installed behind the 200AE1.
Firewall Ports to Open
161 (SNMP) and 162 (SNMPTRAP)
1056 to 1255
SSH TCP 22 for remote management & TCP 80 for WAN
configuration-downloads
23
TCP 21 for stateful TCP-session control from the 200AE1 to
Edgewater FTP server
2427, 2429, 2432, and 2727
123
5060 and 5075
Page 4 of 6