Edgewater Networks EdgeMarc 4550 Panduan Memulai Cepat - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Gerbang Edgewater Networks EdgeMarc 4550. Edgewater Networks EdgeMarc 4550 6 halaman. Networking gateway
Juga untuk Edgewater Networks EdgeMarc 4550: Panduan Pemasangan Perangkat Keras (18 halaman)
Halaman Cetak
Step 3 ! Plan Your Configuration
The EdgeMarc 4550 can be deployed as a gateway router in a network. It can also be deployed
in a network behind an existing firewall. Based on your deployment criteria, consult the following
documents for further configuration:
EdgeMarc 4550 Hardware Installation Guide
•
VoIP Operating System (VOS) for EdgeMarc User Manual
•
Helpful Hints
Although not recommended, the 4550 and IP phones can be installed behind an existing
enterprise firewall. In this instance the firewall will have to be configured to allow access to and
from the 4550's public IP address for the following ports:
Port Type
UDP
RTP
TCP
Telnet
FTP
MGCP
¬
NTP
SIP
IP phones normally point to a local NTP server for their time reference. The NTP port 123
needs to be opened if your network does not have an NTP server.
Please Note: Traffic shaping for this configuration is only available if the enterprise data
devices are also installed behind the 4550.
Firewall Ports to Open
161 (SNMP) and 162 (SNMPTRAP)
1056 to 1255
SSH TCP 22 for remote management & TCP 80 for WAN
configuration-downloads
23
TCP 21 for stateful TCP-session control from 4508T4W to
Edgewater FTP server
2427, 2429, 2432, and 2727
123
5060 and 5075
Page 5 of 6