3G Quest GPX-100 Panduan Pengguna - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk GPS 3G Quest GPX-100. 3G Quest GPX-100 17 halaman. Avl (automatic vehicle locator)

AVL GPX-100 User's Manual

The device can output GPS data thru the RS232 port. Any notebook, PC, or palm

device with a map application, as long as the map application is able to interpret

the GPS data, the whole system becomes a real-time navigation system.

To enable this feature, by pressing F1 key and wait for the F1 LED being turn on,

the device is in navigation mode. To disable this feature, by pressing the F1 key

again and wait for the F1 LED being turn off, the device will end the navigation

mode.

2.5. Arm/Disarm the device

If you have I/O channels are installed and enabled, press Cancel key of the remote

control to arm/disarm the device.

Note that when you arm the device, you must make sure feature LED are all off.

In order to make sure they are off, you can press Cancel key several time to turn

off features and turn on the alarm system.

3G Quest Technologies, Inc.