EdgeWave ePrism 3005 Memulai - Halaman 6
Jelajahi secara online atau unduh pdf Memulai untuk Perangkat Keras Jaringan EdgeWave ePrism 3005. EdgeWave ePrism 3005 16 halaman. Eprism email security suite
Halaman CetakePrism Model 3005
Connecting the ePrism Appliance
The ePrism appliance has two Ethernet ports on the rear of the unit. Connect your PC to Ethernet
port Gb2 for access to the browser-based provisioning interface. Connect the Ethernet port Gb1 to
the public network.
To connect your computer to the Ethernet port
•
Use an Ethernet cable with male RJ-45 connectors on each end. This is a cross-over
connection, though most computers can auto-detect the cable type and adjust to use a straight-
through cable.
•
Connect one cable end to the Ethernet port on your PC.
•
Connect the other cable end to the ePrism appliance Ethernet port labeled Gb2.
To connect the ePrism appliance to the public network
•
Use an Ethernet cable with male RJ-45 connectors on each end.
•
Connect one cable end to the ePrism appliance Ethernet port labeled Gb1.
•
Connect the other cable end to the public network.
Configuring the ePrism Appliance
Note: Do not continue until you have confirmed firewall rules and network access are in
place for the ePrism appliance. Confirm network access by pinging the internal IP you
assigned to the ePrism appliance. Confirm the rules for ePrism in your firewall one last
time before proceeding.
Figure 1. Ethernet Ports
Getting Started
4