ALTRAN RM09-43L Petunjuk Manual - Halaman 8
Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Aksesori Kamera ALTRAN RM09-43L. ALTRAN RM09-43L 10 halaman.
Halaman CetakCONTROL MODES
The dry contact interface motor provides 3 different control modes. The setting mode can be toggled by adjusting
the cicle of the switch.
3-button control (as default)
2-button control
Direct control
INSTALLATION DIMENSION
(In mm)
A= 80
B=14 0
A= 30
A= 50
B= 60
B= 80
A= 80
B= 140
OTHER INFORMATION
• There is no limitation for motors quantity by one remote control. Some motors may response not so quick if the
signal is not strong enough due to distance. One motor can be controlled by 16 different channels maximum.
• The tracks are not supplied with the end limits programmed. Please open and close the curtain so that the system
detects automatically the end limits.
• Wall wireless 2-channel switch control available (REF.J.R127)
ALTRAN SOLUTIONS SL
Ctra. Valencia-Ademuz, Km 21,9.
46181 · Benissanó · Valencia · SPAIN
Action
Open
Close
Stop
Action time should take less than 1s
Action
Open
Close
Stop
Press any button again
Action
Open
Close
Stop
Action time should continue
A= 130
22 0
A= 30
A= 50
A= 50
B= 60
B= 80
B= 80
A= 130
B= 220
Change the control mode
The control mode can be toggled by the mode switch
setting
Press [setting] button
Press [Channel selec-
for 3 s till the light swit-
tion] & [Channel setting]
ches on
buttons at once
A- Minimum distance recommended
B- Maximum distance recommended
Power socket
Dry contact
LED light
Settings button
(Reverso)
Press again [setting]
button to confirm the
operation.
Tel.: 00 34 96 113 61 53
Fax: 00 34 96 113 61 27
www.altransolutions.es
8