ClearWater Lights Billie Panduan Pengoperasian - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Aksesori Sepeda Motor ClearWater Lights Billie. ClearWater Lights Billie 12 halaman. Dimmable

ClearWater Lights Billie Panduan Pengoperasian
WW = WonderWheel (BMW multifunction controller)
Function
Clearwater
Brake Light
Dimmer
Clearwater
Brake Light
Default Brightness
Page 4
TSC = Turn Signal Cancel
TPM = Tire Pressure Monitor
FTP = Flash To Pass
Command
To enter the dimmer
program, you must first
hold the front brake, next
press and release the TSC
button before holding
the WW to the right until
the light flashes twice to
indicate you've entered
the dimming mode.
While stationary, press
and release the TSC but-
ton then press and release
the front brake lever 5
times within 5 seconds to
cycle through Modes 1 - 4.
Example: Brake light
begins in Mode 2, running
through the mode chang-
ing procedure brings
you to Mode 3. Running
through the mode chang-
ing procedure again will
bring you to Mode 4
Levels
Day
Night
Modes
Rotate WonderWheel to select 10
brightness levels (10% to 100%)
• To adjust brightness on the tail
light - release the brake after
entering dimming mode, then
rotate the WW.
• To adjust brightness on brake
light- hold the brake while rotate
the WW.
Mode 1 – off
Mode 2 – functions identically to
BMW brake light
Mode 3 – California legal strobe
on brake activation (4Hz flash)
Mode 4 – speed sensitive
(flashes faster and brighter with
harder braking)
Note: Modes 3 & 4 will only acti-
vate when speed is above 5 mph.
Tail
20%
10%
Page 3
(default)
Brake
70%
60%