ClearWater Lights Erica Panduan Instalasi - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Aksesori Sepeda Motor ClearWater Lights Erica. ClearWater Lights Erica 12 halaman. Kawasaki concours 1400 led light kit dimmable patent pending
Juga untuk ClearWater Lights Erica: Panduan Instalasi (16 halaman), Panduan Instalasi (8 halaman)
Halaman Cetak
Step 4: Wiring
Wiring Diagram for Krista/ Erica/ Sevina
Note: it does not matter
which white wire you
hook up to the horn or
high beam. Both trigger
the same way. If you do
not want the high beam or
horn option, just simply
tuck the unused white
wire(s) away.
Volume Control
POT
Glenda/ Darla Option:
Darla wires coming from harness
will be shorter than Krista/Erica/
Sevina wires.
Horn Option:
use a posi-tap
to connect the
High Beam Option:
other white
use a posi-tap to con-
wire to the
nect one of the white
horn hot.
wires to the high
beam hot.
Page 6
Switch: Connect the Yellow wir e mar ked "Switch
Load" to the "load" terminal (Middle terminal) on the
switch. Connect the Red wire
switch" to the "supply" terminal (Opposite side of the
LED light terminal) on the switch. Connect the Black
wire marked "Ground" to the "earth" terminal (Under
the LED light terminal) on the switch.
Turn On Wire: use a posi-tap to
connect to low beam or switched
accessory hot. (Do not connect to
low beam wire if you have H4
headlight Bikes)
Posi-lock:
joins fuse to
relay box
Power: Connect
the red wire from
the fuse to the
hot (+) on the
battery. Connect
the black wire to
ground (-).
marked "12V+ to
Fuse
15A
-
+
8/3/2018
Page 7