ClearWater Lights Glenda Panduan Instalasi - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Peralatan Pencahayaan ClearWater Lights Glenda. ClearWater Lights Glenda 12 halaman. Led light kit for bmw k1600gt
Juga untuk ClearWater Lights Glenda: Panduan Instalasi (12 halaman), Panduan Instalasi (12 halaman), Panduan Instalasi (12 halaman), Panduan Instalasi (16 halaman)

Halaman Cetak

Helpful Hints:

Using a Drip Loop:

• Though our lights are sealed for ultimate all weather use, sometimes

water sneaks by. To make sure this doesn't happen, we highly suggest

using a drip loop. When installing the wiring to your lights, use a drip

loop as shown below. This will keep water from dripping directly into the

light and instead fall off before it can reach the back of the body.

• To do this just leave a bit of extra wiring and let it hang below the light.

You could make a complete loop if you like, but just make sure the wire

hangs below the light as shown below.

Posi-Products Installation Instructions:

Posi-twist (A):

1. Strip all wires to be inserted 3/4" .

2. Twist all wires together.

3. Completely unscrew the top from the Posi-twist.

4. Feed the twisted wires through the bottom portion of the Posi-twist.

5. While ensuring the wires do not slip out of the bottom of the Posi-twist,

attach the top and tighten.

Posi-tap (B):

1. Unscrew the cap of the Posi-tap (gray or large end).

2. Slide the wire you wish to tap into through the slot in the cap.

3. Re-attach the body of the Posi-tap and tighten.

4. Attach the other wire to the bottom using the same method as a Posi-Twist.

No Drip Loop

With Drip Loop

Page 11