ArtFox SKY BEAM 9R Panduan Pengguna - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan DJ ArtFox SKY BEAM 9R. ArtFox SKY BEAM 9R 16 halaman.

Set display

Light support 2 language, rotation display，Enter page as shown in Figure9 to set parameter

following:



Language：Select display as simplified Chinese or English.



Screen Saver：when panel is idle(these is no operation in 10 second), displayer will enter

saver status. When set as 'mode 1'，saver status is close display, as 'mode 2' saver status

will display DMX address code(DMX MODE) or display LOGO(AUTO RUN or SOUND

CTRL). As 'OFF', keep light up displayer and show main menu。



Screen Rotation：rotate displayer.



Touch enable：Disable or enable touch function, when disable, use encoder to operate light

and set parameter.



Touch adjust：adjust touch function, normally, not enter this item.

Enter the page as shown in Figure 10, Light will into test mode, in this mode, the light does not

receive the data for DMX controller.:



PAN: range for 0 to 255;



TILT: range for 0 to 255;



FOCUS: range for 0 to 255;



COLOR: range for 0 to 255;



GOBO: range for 0 to 255;



PRISM: range for 0 to 255;



FROST: range for 0 to 255;；



STROBE: range for 0 to 255;。

Figure9

page of display

Figure 10 page of Test

Page 9