Clearwater Spas CLEAR Panduan Pengguna - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sistem Air Clearwater Spas CLEAR. Clearwater Spas CLEAR 8 halaman.

MAIN CONTROLLER OVERVIEW

Ionizing

Ion/Action

Large Dose

"-"

"+"

Program Lock This feature will lock the controller at the currently

4 | User Guide

When the "Ionizing" light is illuminating, it confirms

that the system is ionizing the water. To illuminate, the

electrodes must be fully submersed in water, and current

must be flowing from the electrodes into the water.

The more ions that are being released into the water,

the faster the light will blink. The light will look solid at

maximum dose.

This setting represents the percentage of time in each

hour the Ionizer is on for. The suggested setting follows

in the operating instructions.

Press this button to release the maximum amount of

ions for the number of hours you choose. The display

will count down the number of hours left. The system

will return to the previously set Ion/Action setting when

the large dose ends.

This button will decrease the setting for Ion/Action or

Large Dose.

This button will increase the setting for Ion/Action or

Large Dose.

programmed settings. To lock the program, hold down

the "-" button and the "+" button simultaneously for 20

seconds. You will see "PL" (program lock) appear on the

screen. To unlock, use the same process.