ARTFOX Lighting Sky Beam 14RX Panduan Pengguna - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Pencahayaan ARTFOX Lighting Sky Beam 14RX. ARTFOX Lighting Sky Beam 14RX 16 halaman. 295w lamp,15 prisms effects, rainbow
Halaman Cetak
2.1 Brief
The light panel diagram show as Figure 3, Left area is TFT Displayer, support touch, and right area is
KEY, both of touch and KEY can operate light and setting.
Display & operation just like "Android operation system", touch the item will set or modify setting.
Note: Prevent damage the touch or TFT displayer, do not use sharp objects chick displayer.
2.2 Operation
2.2.1 Operate light with touch or KEY
The left area is TFT Displayer and touch, chick item or value with finger will to complete operation of
set light setting (parameters) or view light state.
The area on the right hand side is 4 KEY. As auxiliary input interface, if disable touch function,, the
KEY can been choose to set the parameter.
2.2.2 Parameter value setting
When the selected item is value need to been modified, the dialog shown in Figure 4 will popup.
Modify value：Can quickly modify value via pull the slider to the desired position, or click the
button of 'up' or 'down' whit finger on the right side to set the exact desired value, another way is roll
encoder on the right hand side of panel.
Apply value：When Value had been modified, Then press the bottom of 'apply' in the left corner to
apply to the light, but haven't saved；
Save Value：Any time, click on the lower right corner of the "OK" button, the setting will be saved
into internal memory.
Chapter 2 Panel operation
Figure 3 Panel diagram
Figure 4 Dialog of value setting
7