ARTFOX Lighting Flex Beam X5 Panduan Pengguna - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Lampu Banjir ARTFOX Lighting Flex Beam X5. ARTFOX Lighting Flex Beam X5 6 halaman. Artfox lighting flex beam x5 user manual

Halaman Cetak

ATTENTION

Ensure the supply voltage consistent with host labeled voltage.

Don't put other electrical power cord connect this equipment power

input and output line.

Before connecting 110-240V AC, please ensure the power switch

socket connected with the ground.

Ensure safety, please choose the power socket of high quality.

This equipment's ground wire is yellow-green color.

Prevent collision when you move or install this equipment.

When the equipment stop working is hot, please touch the equipment after 10

mintues cooling.

Turn off the power before you mounting the equipment.

Maximum operating temperature is 45℃

Please keep at least 0.5 meter distance with the combustibles.

1.3 Installation

Horizontal installation：

Fixed the hanging frame in place, adjustable angle.

Hang installation:

Warning: Ensure that the installation site is completely suitable,safety and reliable.

When installing the equipment,keep at least 0.3 meter distance with the

combustibles (decorated things, etc) .

Fix the clamp on the equipment hanger, then fix the equipment in the right place.

Installation place must be able to bear more than ten times of the equipment

weight. Test whether the installation site deformed or not in one hour.

Hanging the equipment in the air, usually use a safety rope, which must be

able to bear more than ten times of the equipment weight.

2 Operation

2.1 Button operation

MENU: Scroll through the main menu or exit from the

current sub-menu

ENTER： Enter the currently selected menu or confirm the current

function value.

DOWN： Scroll "DOWN"through the menu list or decrease the value

of the current function.

UP： Scroll"UP"through the menu list or increase the value

of the current function.

2.2 Display menu Function

Menu display

DMX-MODE

CH14/30

DMX-ADR

ADJ－R

0～255

ADJ－G

0～255

ADJ－B

0～255

ADJ－W

0~255

PROGRAM

ADJ－S

　TEST _MOD

RESET ？

Channel

Value

Function

Operation

Press up/down button to select channel mode,

press enter to save

Press up/ down button to select address cost,

press enter to save

Adjust red brightness, press enter to save

Adjust green brightness, press enter to save

Adjust bule brightness, press enter to save

Adjust white brightness, press enter to save

Built-in program select, press enter to save

Built-in program speed select, press enter to save

Control mode select

Press down confirm to select reset