Edic ENDEAVOR Panduan Pemilik/Operator - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pemilik/Operator untuk Pembersih Perhiasan Ultrasonik Edic ENDEAVOR. Edic ENDEAVOR 17 halaman. Multi-purpose extractor
Juga untuk Edic ENDEAVOR: Panduan Cepat (15 halaman)

Halaman Cetak

GROUNDING INFORMATION:

This piece of equipment must be grounded. Should an

electrical malfunction occur, grounding provides a path

of least resistance for electrical current- reducing the risk

of electric shock. This piece of equipment is furnished

with a cord that has a grounding conductor and ground-

ing plug. The grounded plug must only be plugged

into an appropriate outlet that is properly installed and

grounded in accordance with all local codes and ordi-

nances.

WARNING:

Connecting the equipment to an improperly grounded

outlet can result in an increased risk of electric shock. A

qualiﬁed electrician should be consulted if you are un-

sure that the outlet is properly grounded. Do not modify

the plug provided with the equipment. If it will not ﬁt

the outlet, have a proper outlet installed by a qualiﬁed

electrician. Replace the plug if the grounding pin is dam-

aged or broken.

This appliance is designed for use on a 120-volt circuit.

The Green (or Green/Yellow) wire in the cord is the

grounding wire. When replacing a plug, this wire must

be attached to the grounding pin only.

Extension cords connected to this machine should be

12 gauge, three-wire cords with three-prong plugs and

outlets. DO NOT use extension cords more than 25 feet

(7.6 m) long.

GFCI CORD FUNCTION:

The ENDEAVOR's power cords are equipped with a built

in GFCI (Ground Fault Circuit Interrupter). The GFCI

function is automatic and, under normal operating con-

ditions, the GFCI function will not be activated.

A GFCI works by monitoring the amount of current that

is flowing from hot to neutral. If the GFCI senses an im-

balance in that flow, such as a ground leak, it will disable

(interrupt) the electrical system to eliminate dangerous

operating conditions. If the GFCI trips due to a tempo-

rary incident, you may restore function by pressing the

button on the GFCI box marked Reset "RESET" button

on the GFCI box.

RESET

TEST

If a GFCI continues to trip after resetting, it indicates

an unsafe operating condition is present and it is best to

take it to an authorized repair location for servicing.

POSSIBLE CAUSES AND SOLUTIONS TO

MALFUNCTIONING GFCI ARE:

•

Your equipment has become wet and moisture has

come in contact with the electrical system. Take unit

to an authorized repair location for servicing.

•

Your machine is submerged in liquid. If it is safe to

do so, remove the equipment and take unit to an

authorized repair location for servicing.

There is damage to the power cord. Replace the

•

power cord immediately with the correct spec

cord.

•

The wall plug or cord plug may be wet or in contact

with water. Using thick rubber gloves, unplug the

cord from the wall.

•

A leak in your machine's plumbing may be wetting

the internal electrical components. Take the unit to

an authorized repair location for servicing.

•

There is a loose or faulty electrical connection

somewhere in your equipment. Take the unit to an

authorized repair location for servicing.

GFCI MAINTENANCE:

Although the GFCI function works on its own, it is nec-

essary to test for proper function of your GFCI periodi-

cally. To do this:

1. Plug your equipment to an appropriate wall plug.