dji AGRAS MG-1S RTK Panduan Memulai Cepat - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Drone dji AGRAS MG-1S RTK. dji AGRAS MG-1S RTK 20 halaman.

Mounting the Battery

Insert the battery into the battery compartment from the front of the aircraft. Ensure the battery is securely

mounted and then buckle the belt to the button of the spray tank.

XT90 Port

Belt

The MG-1S / MG-1S RTK does not come with a battery. Please purchase the DJI approved MG-1S battery pack (Model:

MG-12000S).

The voltage on the aircraft can reach 50.4 V. Read the battery's safety guidelines and take necessary precautions when

handling the battery to ensure your own safety.

Mounting the USB Stick

The USB stick is used for the display device of the remote controller to allow access to specific networks (such

as connecting to the DJI Agriculture Management Platform, etc.). Be sure to mount it correctly onto the remote

controller, or else the related services cannot be used.

1. Remove the four screws and the cover on the back of the remote controller.

2. Insert the SIM card into the USB stick correctly and then connect the USB stick to the USB port inside the

remote controller. Test to ensure that they function properly.*

3. Re-mount the cover and tighten the screws.

Be sure to use a DJI approved USB stick.

Use the USB stick and the SIM card according to their manuals.

* Test procedure: Press once, again and hold the power button of the remote controller to turn it on. Go to DJI MG

app >

> Network Diagnostics. If the "DJI Agriculture Management Platform" is "Normal", it indicates that the

USB stick and SIM card are working properly.

AGRAS MG-1S

Quick Start Guide

Battery Communication Port

Button