EDIFIER e10 Panduan Pengguna - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembicara EDIFIER e10. EDIFIER e10 16 halaman. Multimedia speaker
Juga untuk EDIFIER e10: Panduan Pengguna (15 halaman)

Halaman Cetak

Operational guide

Power on

1. Connect the power adapter to the speaker and then connect to the wall socket.

2. The indicator light on the front panel is now lit, the system is on. Press & hold the

approximately 3 seconds to put the system into standby mode. Press the

back on.

AUX input

1. Connect the AUX input cable to your PC sound card, MP3 player or external audio source using the

3.5mm to 3.5mm audio connecting cable.

2. Play the selected audio on the connected device.

3. Adjust the volume to the desired level.

English

button for

button to turn the system

Power output:

RMS 8W × 2 + 10W × 2 (DRC on)

Signal to noise ratio:

≥85dBA

Frequency response:

56Hz~17KHz (±6dB)

Input type:

AUX

Input sensitivity:

R/L: 700 mV ± 50mV

SW: 350 mV ± 50mV

Adjustment:

Buttons on active speaker

Bass unit:

3 inch (82mm), magnetically shielded, 6 ohm

Treble unit:

1½ inch (40mm), magnetically shielded, 8 ohm

Dimension:

105(W) × 310(H) ×180(D) mm

Net Weight:

Approx. 2.4 kg

Gross Weight:

Approx. 3.0 kg

Specifications

English